Network-computing-devices Wireless Ethernet Adapter GW-EN11H Bedienungsanleitung PDF herunterladen (Seite 21)

GeoWave GW-EN11H Wireless Ethernet Adapter User's Manual

The Server Tab

IP Address Mode: Select “Static” or

“DHCP” mode. For “Static” mode,

the IP address settings are given by

user. For “DHCP” mode, IP settings

will be overridden by a DHCP server

on your network. The default setting

is “Static”

IP Address: The static IP address

you want to assign to the adapter.

The default value is “192.168.1.100

”.

IP Subnet: The subnet mask you

want to assign for the adapter. The

default value is “255.255.255.0

”.

IP Gateway: The gateway you want

to assign for the adapter. The default

value is “192.168.1.1

”.

Allow upgrade uploads: Check the

box, and then it is allowed to

upgrade firmware.

Note!

You may need to reboot the adapter, and then re-load the page to see

any new settings.

The Admin Tab

Change password: Default

password is “admin”. For security

concerns, please change it after

finish the configuration.

Reboot Adapter: When any setting

was changed, the adapter MUST be

reboot so that the change can be

confirmed.

Reset to factory defaults: This

option will ERASE all the current

settings, and restore to the factory

default settings.

Note!

You may need to reboot the adapter, and then re-load the page to see

any new settings.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26

Kommentare zu diesen Handbüchern

Keine Kommentare

Network-computing-devices Wireless Ethernet Adapter GW-EN11H Bedienungsanleitung Seite 21

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Hardware Network-computing-devices Wireless Ethernet Adapter GW-EN11H